How to Install and Use The American or Universal Flag Kit
Thank you for purchasing the American Flag Kit — show your American pride!
The written instructions are below, or you can watch an installation video here:
Includes:
A: American Flag (1)
B: Mounting Brackets (1 set)
C: 3/8” Aluminum Flagpole (1)
D: Rubber Inserts (3 sets)
E: Socket Head Cap Screws (SHCS) and Lock Washers (1 set)
F: 3M Double-Sided Rubber Cushion (1)
G: Heavy Duty O-Ring (1)
Step-by-Step Instructions
1: The kit is shipped with rubber inserts pre-installed to fit the FFR 1-1/2” roll bar.
2: If your roll bar is not an FFR part, measure its diameter.
3: Choose the correct combination of rubber inserts to fit your roll bar diameter.
4: Determine where you want to position the American Flag Kit on your roll bar.
5: Place towels or padding under your selected position to protect the paint during installation.
6: Clamp the roll bar with the brackets, then install and gently snug the supplied socket head screws and lock washers.
7: Adjust the bracket to its final position, then securely tighten the screws in a staggered sequence.
Do not overtighten — this may strip the threads.
8: Your American Flag Kit is now installed and ready to show your American pride!
Warranty:
Marlin Enterprises Inc. warrants the American Flag Kit against manufacturing and material defects for 90 days from purchase. Proper installation is the owner’s responsibility. Use of the kit indicates the owner has read and understood the instructions, confirmed proper attachment, and assumes all responsibility for vehicle damage and/or injury should it occur. Use of the product waives all rights for compensation from Marlin Enterprises Inc. or its partners/subsidiaries.